Troubleshooting - Husqvarna Viking Sapphire 960Q User Manual

TROUBLESHOOTING

Have Your Sewing Machine Serviced Regularly by your Local Authorized Dealer!
General Problems
Thread cutter does not cut the thread?
Wrong stitch, irregular or narrow stitch?
The machine will not sew?
Icons on the touch screen are not activated when
touched?
The sewing machine screen and/or
Needle Thread Breaks
Did you insert a wrong needle?
Is the needle too small for the thread?
Did you thread the machine properly?
Is a correct spool cap used?
Bobbin Thread Breaks
Is the needle plate hole damaged?
®
Remove stitch plate and clean lint from bobbin area.
Enable Selective Thread cutter Auto in the SET Menu.
Deactivate Twin Needle or Stitch Width Safety Sewing Settings in the SET Menu.
Insert needle correctly as described in chapter 2.
Check that all plugs are securely plugged into the machine and into the wall socket.
Calibrate the touch screen. Calibrate is found in the SET Menu (Touch Screen
Adjust).
electricity. If the screen does not respond to touch, turn the machine
®
Insert needle correctly as described in chapter 2.
Use needle system 130/705 H.
Insert a new needle.
Change the needle to the proper size for the thread.
Change the stitch plate.
Check how the machine is threaded. Rethread the machine (see page 2:5).
®
Attach a spool cap of the right size for the actual thread spool (see chapter 2).
If you are using a vertical spoolpin, you should not have a spoolcap on top of the spool.
Change the stitch plate (see page 7:2).
® retailer who will be happy to help you.
retailer.
retailer.
M
AINTENANCE
7:3