Threads 2:10; Stabilizers - Husqvarna Viking Sapphire 960Q User Manual

THREADS
different purposes.
All Purpose Sewing Thread
sewing garments and projects.
Embroidery Thread
polyester, acrylic or metallic. These threads create a smooth
stitching.
Transparent Thread
wind at slow speed and wind the bobbin half full.
Note: Some fabrics have excess dye which can cause discoloration on
other fabrics or on your sewing machine. This discoloration may be
Fleece and denim fabric, especially red and blue, often contain excess
dye.
If you suspect that your fabric/ready-to-wear garment contains a
lot of excess dye, always pre-wash it before sewing/embroidering to
prevent discoloration of your machine.
2:10 2:10

STABILIZERS

Tear-Away Stabilizers
with the fabric when embroidering. Tear away excess
stabilizer after stitching.
Iron-on Tear-Away
Iron-on tear-away is a totally stable stabilizer that has a slick
side that will iron on to fabric. It is recommended for knits
and all unstable fabrics. Fuse it to the wrong side of the
excess stabilizer after stitching.
Cut-Away Stabilizer
Cut-away stabilizer does not tear so the excess has to be cut
away. It is recommended for knits and all unstable fabrics,
especially for hoop embroidery.
Water Soluble Stabilizer
Water soluble stabilizer is placed on top of the fabric when
embellishing/embroidering napped and looped fabrics
such as terry cloth. When embroidering cutwork, use it
Disintegrating Stabilizer
off the fabric edge. The stabilizer disappears with heat.
Sticky Stabilizer
and stick the fabric onto the sticky surface. Tear away sticky
stabilizer after stitching.
PICTOGRAM PEN
™
Use an air or water soluble marking pen for embroidery and
Pictograms on all types of fabrics. The color disappears
after a few hours. You can also use cold water to completely