Troubleshooting - Husqvarna Viking Eden Rose User Manual

Troubleshooting

Condition /Cause
the needle thread Breaks
• The needle thread is not threaded properly.
• The needle thread tension is too tight.
• The needle is bent.
• The needle is incorrectly inserted.
• The needle thread and the bobbin thread are not placed
under the presser foot at start of sewing.
• The threads were not drawn to the rear after sewing.
the Bobbin thread Breaks
• The bobbin thread is not threaded properly in the bobbin
case.
• Lint has collected in the bobbin case.
• The bobbin is damaged and does not turn smoothly.
the needle Breaks
• The needle is incorrectly inserted.
• The needle clamp screw is loose.
• The threads were not drawn to the rear after sewing.
• The needle is incorrectly inserted, bent or blunt.
• The needle and/or threads are not suitable for the fabric
being sewn.
skipped stitches
• The needle thread is not threaded properly.
• A poor quality needle is used.
• The needle thread tension is too tight.
seam Puckering
• The needle thread is not threaded properly.
• The stitch length is too long for the fabric.
reFerenCe
Page 16
Page 21
Page 12
Page 12
Page 22
Page 23
Page 15
Page 41
Change the bobbin
Page 12
Page 12
Page 23
Page 12
Page 12
Page 16
Change the needle
Page 21
Page 16
Make stitch shorter.
43