Spool Pins; Vertical Position - Husqvarna Viking Sapphire 960Q User Manual

SPOOL PINS

Your machine has two spool pins; a main spool pin and
an auxiliary spool pin. The spool pins are designed for all
types of thread. The main spool pin is adjustable and can
Use the horizontal position for regular sewing threads and
specialty threads.
HORIZONTAL POSITION
Place a spool cap and the thread spool on the spool pin.
wise and slide on a second spool cap. Use a spool cap
slightly larger than the thread spool.
against the spool. There should be no space between the
spool cap and the thread spool.
Note: Not all thread spools are manufactured in the same way. If
you experience problems with the thread, turn it in the opposite way or
use the vertical position.

VERTICAL POSITION

Lift the spool pin up and all the way to the right. Lock
the medium size spool cap or when using specialty threads,
place a
thread from reeling off too fast. For larger spools, the felt
pad is not needed.
Note: When the spool pin is used in the vertical position, the thread
tension might need to be adjusted manually.
AUXILIARY SPOOL PIN
The auxiliary spool pin is used when winding a bobbin
from a second spool of thread or for a second spool when
sewing with a twin needle.
the large spool cap. For spools smaller than the medium
size spool cap, place a felt pad under the thread spool to
spools, the felt pad is not needed.
2:4