Edit Your Stitch Or Lettering Program; Tabs In Program Mode - Husqvarna Viking Sapphire 960Q User Manual

EDIT YOUR STITCH OR LETTERING
PROGRAM

TABS IN PROGRAM MODE

the stitches that you can program. The third tab is the Font
Insert a Stitch or Letter
insert. It will be placed at the cursor.
Adjust Text and Stitches
You can mirror, adjust length and width or change the
density of the selected stitch, in the same way as when
Delete a Stitch or Letter
Note: A straight line at the point of the Scroll Up or Down icon
indicates scroll to beginning or end.
STITCH PROGRAM COMMANDS
You can insert FIX and thread cut commands into
the stitch program. These commands will be included in
the stitch program and will always be performed when
sewing it.
a command using the scroll up/down arrows. Touch the
button or an icon on screen and it will be added into the
inserted and it also shows where the command will be
performed in the stitch program.
Sewing Information Tab
Stitch Menu
Font Menu
Stitch width
Delete
Mirror End-
to-End
Mirror Side-
to-Side
Stitch Length
P 5:3
ROGRAM