Free Arm 2:3; Spool Pins 2:3; Horizontal Position; Vertical Position - Husqvarna Viking Viking Royale User Manual

FREE ARM
it and use the free arm. Use the free arm to facilitate sewing
trouser legs and sleeve hems. To replace the accessory tray, slide
SPOOL PINS
main spool pin and an
auxiliary spool pin. The spool pins are designed for all types of
thread. The main spool pin is adjustable and can be used both
position for regular sewing threads and the vertical position for
specialty threads.

HORIZONTAL POSITION

Place a spool cap and the thread spool on the spool pin. Make
sure that the thread reels off the spool counter clockwise and
slide on a second spool cap.
Note: Not all thread spools are manufactured in the same way. If you
experience problems with the thread, turn it in the opposite way or use the

vertical position.

large thread spools, use a larger spool cap in front of the spool.
the spool. There should be no space between the spool cap and
the thread spool.
VERTICAL POSITION
Lift the spool pin up and all the way to the right. Lock the spool
spool cap or when using specialty threads, place a felt pad under
the thread spool to prevent the thread from reeling off too fast.
Do not place a spool cap on top of the vertical spool pin as it
may prevent the spool from rotating.
Note: When the spool pin is used in the vertical position, the thread tension
might need to be adjusted manually.
AUXILIARY SPOOL PIN
The auxiliary spool pin is used when winding a bobbin from a
second spool of thread or for a second spool when sewing with
a twin needle.
place a felt pad under the thread spool to prevent the thread
be used.
Note: When sewing with two needle threads, deactivate deLuxe Stitch
™
System button in Machine Settings.
S 2:3
ET UP