Auxiliary Function; Warning Indicators; Time Delay; Canceling The Time Delay - Beko DCU 8230 Installation & Operating Instructions And Drying Guidance

Selecting a Programme and Operating Your Machine

6.5 Auxiliary function

Cancel audio warning
Your dryer will give an audio warning when the programme
comes to an end. If you do not want to hear the audio
warning, press "Cancel Audio Warning" button. The
relevant light will turn on when this button is pressed and
an audio warning will not be given when the programme
comes to an end.
C
You can select this function either before or
after the programme starts.

6.6 Warning indicators

C
Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after
the programme finishes.
C
If the filter cleaning warning light lights up
continuously, please refer to, "Suggested
solutions for problems".
Water tank
Warning light starts flashing when the tank is filled with
water. The dryer stops operating if the warning light turns
on when a programme is running. Drain the water in the
water tank to restart the dryer. Press "Start/Pause/Cancel"
button to start the programme after you have emptied the
water tank. The warning light turns off and the programme
resumes operating.

6.7 Time delay

If you wish to dry your clothes at a later time, thanks to the
time delay function, you can delay the programme start up
to 3 hours, 6 hours or 9 hours.
• Open the loading door and put the laundry in.
C
Make sure that all air outlets are open,
door filter is cleaned and the water tank is
empty.
• Set the drying programme and, if required, the
auxiliary functions.
• When the time programming button is pressed
once, a 3 hour delay is selected and the relevant
led lights. When the same button is pressed again,
6 hours; and if pressed once more, 9 hours delay
will be selected. If the time programming button is
pressed one more time, time delaying function will
be cancelled. Set the time delay as you require.
• Delayed operation of the selected programme is
started by pressing the "Start/Pause/Cancel" button
after selecting the time delay.
22 /32 EN
C
Additional laundry may be loaded / taken
out during the time delay period.
During the time delay period, laundry is
C
rotated for 4 seconds in every 10 minutes
to prevent creasing.

6.8 Canceling the time delay

If you want to cancel the time delay countdown and start
the programme:
• Press "Start/Pause/Cancel" button for about 3
seconds.
• Press "Start/Pause/Cancel" button to start the
programme right away.
•

6.9 Starting the programme

• Press "Start/Pause/Cancel" button to start the
programme.
• Light of the "Start/Pause/Cancel" button will turn on
to indicate that the programme has started.

6.10 Progress of programme

Progress of a running programme is shown through the
programme follow-up indicator.
At the beginning of every programme step, the relevant
indicator LED will light up and light of the completed step
will turn off.
"Drying":
- Drying level will be illuminated during the whole drying
process until the drying degree reaches "iron dry".
"Iron Dry":
- Starts to illuminate when the drying degree reaches
"iron dry" step and remains illuminated until the next step.
"Cupboard dry":
Starts to illuminate when the drying degree reaches
"Ready to wear" step and remains illuminated until the
next step.
"Final / Anti-creasing":
- Illuminates when the programme comes to an end and
anti-creasing function is activated.
If more than one LED light up or
C
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
6.11 Changing the programme after it
has started
You can use this feature to dry your clothes under higher
or lower temperatures after your dryer has started.
For example;
• Press and hold the "Start/Pause/Cancel" button
for about 3 seconds to "Cancel" the programme in
order to select "Extra Dry" programme instead of
"Iron Dry" programme.
Dryer / User Manual