Product Safety - Beko DCU 8230 Installation & Operating Instructions And Drying Guidance

Important safety and environmental instructions
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect the dryer
to power supply in order to decrease the risk of fire and electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed notifying the Authorized
Service.
B
If the dryer is faulty, it must not be operated unless it is repaired
by an authorized service agent! There is the risk of electric shock!

1.1.2 Product safety

Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried
in the dryer considering fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain
removers, turpentine, paraffin or paraffin removers must be
washed in hot water with plenty of detergent before being dried
in the dryer.
For this reason especially the items containing the above specified
stains must be washed very well, to do this
use adequate detergent and choose a high washing
temperature.
Dryer / User Manual
5 / 32 EN