Auxiliary Function; Warning Indicators; Starting The Programme - Beko DRVS 83 W User Manual

5.7 Auxiliary function

Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear the audio warning,
press "Cancel Audio Warning" button.
The relevant light will turn on when this
button is pressed and an audio warning
will not be given when the programme
comes to an end.
C
You can select this function
either before or after the
programme starts.

5.8 Warning indicators

C
Warning indicators may differ
according to the model of your
dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning
light lights up continuously,
please refer to, "Suggested
solutions for problems".

5.9 Starting the programme

1. Press "Start/Pause/Cancel" button to
start the programme.
2. Light of the "Start/Pause/Cancel"
button will turn on to indicate that the
programme has started.
5.10 Progress of programme
Progress of a running programme is shown
through the programme follow-up indicator.
At the beginning of every programme step,
the relevant indicator LED will light up and
light of the completed step will turn off.
"Drying":
- Drying level will be illuminated during the
whole drying process until the drying degree
reaches "iron dry".
"Iron Dry":
- Starts to illuminate when the drying
degree reaches "iron dry" step and remains
illuminated until the next step.
22
" Ready to Wear":
Starts to illuminate when the drying degree
reaches "Ready to wear" step and remains
illuminated until the next step.
"Final / Anti-creasing":
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.
C
If more than one LED light up
or flash concurrently, it means
there is malfunctioning or a
failure (please see, Solution
suggestions for problems).
5.11 Changing the programme
after it has started
You can use this feature to dry your clothes
under higher or lower temperatures after
your dryer has started.
For example;
1. Press and hold the "Start/Pause/Cancel"
button for about 3 seconds to "Cancel"
the programme in order to select "Extra
Dry" programme instead of "Iron Dry"
programme.
2. Select the "Extra Dry" programme by
rotating the programme selection button.
3. Press "Start/Pause/Cancel" button to
start the programme.
Dryer / User Manual