Beko DCU 8230 Installation & Operating Instructions And Drying Guidance
Condenser sensor dryer
Hide thumbs
Also See for DCU 8230:
- User manual (41 pages) ,
- Installation & operating instructions and drying guidance (32 pages) ,
- Service manual (26 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko DCU 8230
Summary of Contents for Beko DCU 8230
- Page 1 Condenser Sensor Dryer DCU 8230...
- Page 2 Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Dryer Programme selection and consumption table ..........15 Overview ..........4 Auxiliary function ........16 Technical Specifications .......5 Warning indicators ......16 Time delay .........16 2 Important safety information 6 Starting the programme .....16 General safety ........6 Progress of programme .....16 Intended use ........7 Changing the programme after it has Children’s safety ........7... -
Page 4: Your Dryer
Overview 1- Control panel 5- Rating plate 2- Kick plate opening tab 6- Fluff filter 3-Adjustable feet 7- Power cord 4-Kick plate 4 EN... -
Page 5: Technical Specifications
Technical Specifications Height (adjustable) 84,6 cm Width 59,5 cm Depth 59,8 cm Capacity (max.) 8 kg Weight (net) 38 kg Voltage Rated power input See rating plate Model code Type label is located behind the loading door. Specifications of this appliance may change without notice to improve the quality of the product. -
Page 6: General Safety
Important safety instructions This section includes safety information that supplied with the product. If it is not will help protection from risks of personal compatible with the socket, have a injuries or materialistic damages. Failure qualified electrician change the socket to follow these instructions shall cause with a suitable one. -
Page 7: Intended Use
published service manual. when the On/Off button is on (while the • Inside and exhaust duct of the product dryer is energized), keep the door of the must be cleaned by the qualified service dryer closed. personnel periodically. Intended use •... -
Page 8: Installation
Installation Refer to the nearest Authorised Service Agent for installation of your product. Preparation of location and electrical installation for the product is under customer’s responsibility. Installation and electrical connections must be carried out by a qualified personnel. Prior to installation, visually check if the product has any defects on it. -
Page 9: Adjusting The Feet
with the machine instead of periodically draining the water collected in the water tank. Connecting the water drain hose; Never unscrew the adjustable feet from their housings. First use • To have the product ready for operation before calling the authorised service agent, make sure that its location and power supply installations are appropriate. -
Page 10: Electrical Connection
Electrical Connection A Undercounter installation without the Make sure that you have an earthed top cover must only be carried out by an power outlet socket rated at 13 amps authorised agent.Risk of electric shock. (minimum). A Important Attention! Fitting a different plug If you use your dryer as built-in, As the colours of the wires in the mains the socket must be reachable after... -
Page 11: Initial Preparations For Drying
Initial preparations for drying Things to be done for energy A B C saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. -
Page 12: Preparing Laundry For Drying
• Do not dry your unwashed laundry in the Consider the information in the dryer. "Programme Selection Table". Always • Items soiled with cooking oils, acetone, start the programme in accordance with alcohol, fuel oil, kerosene, stain remover, the maximum load capacity. turpentine, paraffin and paraffin removers Adding laundry to the machine more must be washed in hot water with plenty... -
Page 13: Selecting A Programme And Operating Your Machine
Selecting a Programme and Operating Your Machine Control panel 1. Filter cleaning warning light 5. Programme selection knob Warning light turns on when the filter is Used to select a programme. 6. Start/Pause/Cancel button full. 2. Programme follow-up indicator Used to start, pause or cancel the Used to follow-up the progress of the programme. -
Page 14: Preparing The Machine
Preparing the machine you do not take the laundry out after the programme is over. This programme rotates 1. Plug in your machine. the laundry in 10-minute intervals to prevent 2. Place the laundry in the machine. creasing. 3. Press the “On/Off” button. Special programmes Pressing the “On/Off”... -
Page 15: Programme Selection And Consumption Table
Programme selection and consumption table Spin speed in Approximate Capacity Drying time Programmes washing machine amount of (kg) (minutes) (rpm) remaining humidity Cottons / Coloreds Cupboard dry 1200-1000 % 60 Normal dry 1200-1000 % 60 Ready to Iron 1200-1000 % 60 Xpress 35’... -
Page 16: Auxiliary Function
Auxiliary function During the time delay period, laundry Cancel audio warning is rotated for 4 seconds in every 10 Your dryer will give an audio warning when minutes to prevent creasing. the programme comes to an end. If you do Canceling the time delay not want to hear the audio warning, press If you want to cancel the time delay... -
Page 17: Child-Proof Lock
3. Press “Start/Pause/Cancel” button to audio warning” buttons simultaneously for 3 start the programme. seconds to activate the child-press lock. To start a new programme after the programme Press “Start/Pause/Cancel” button for is over or to interrupt the programme, the child- 3 seconds to cancel the programme proof lock should be deactivated. -
Page 18: End Of Programme
End of programme The “End/Anti-creasing”, “Filter cleaning” and “Water tank” warning lights on the programme follow up indicator will turn on when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle. Press “On/Off”... -
Page 19: Maintenance And Cleaning
Maintenance and cleaning Filter Cartridge / Door Inner There are humidity sensors in your dryer that detect whether the laundry is dry or not. Surface To clean the sensor: Lint and fibres released from the laundry to 1. Open the loading door of the dryer. the air during the drying cycle are collected in 2. -
Page 20: For The Condenser
2. If there is lint accumulation in the water 3. Pull out the condenser. tank cover, clean it and press to close. 3. Place the water tank into its seat. 4. Clean the condenser by applying For the condenser pressurized water with a shower Hot and humid air in the condenser is armature and wait until the water drains. -
Page 21: Suggested Solutions For Problems
Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. •... -
Page 22: Guarantee
Guarantee Important notes Your new product is guaranteed against the cost of breakdown repairs for twelve months • Your product is designed and built for from the date of the original purchase. domestic household use only. What is covered? • The guarantee will be void if the product is installed or used in commercial or non- •...