What Is Memory Reception - Panasonic Workio DP-C262 Facsimile Manual

Receive to Memory

What is Memory Reception?

Memory reception allows all incoming documents to be stored in memory, instead of printing them onto
the output tray.
If the memory reception feature has been set to "On" in Function Parameters, the message Receive to
Memory appears on the touch-panel display.
Documents received in memory are printed when the pre-programmed password is entered. The received
documents are deleted from memory when their printing completes.
This section explains how to program memory reception, and print documents received into the
memory.
Receiver
The standard setting of "Receive to Memory" is set to "Off" in "More Menus".
You can set the password in Function Parameters (Fax/Email Settings> Fax Parameters).
When memory becomes full, the memory reception is aborted and the communication is cancelled. Pages
already received in memory can be printed.
Once memory is full, incoming documents can no longer be received into memory.
If the memory reception feature has been set to "On", the memory reception password cannot be changed in
Function Parameters. To change the password, follow the steps below:
1. Set the memory reception feature in "More Menus" to "Off".
2. Change the password of "37 Receive to Memory" in Function Parameters (Fax/Email Settings> Fax
Parameters).
3. Set the memory reception feature to "On" in "More Menus".
84
Memory
Sender