Table of Contents
Advertisement
Mixed Size Mode
Mixed size mode allows you to load originals of various sizes in the ADF at the
same time.
Important
❒ When placing originals of different sizes in the ADF and making copies with-
out using the Mixed size mode, paper might become jammed or parts of the
original image might not be copied.
❒ The sizes of the originals that can be placed in this mode are follows:
• Metric version
A3L, B4 JISL, A4KL, B5 JISKL
• Inch version
11" × 17"L, 8
1
❒ You can place two different sizes of originals in the ADF at the same time.
A
Press [Special Original].
B
Select [Mixed Sizes], and then press [OK].
C
Align the rear and left edges of the originals as shown in the illustration.
1 Place the originals into the ADF
2 Vertical size
D
Adjust the document guide to the widest original size.
E
Place originals in ADF.
F
Press the {Start} key.
" × 14"L, 8
" × 11"KL, 5
1
/
/
2
2
CP19AE
Placing Originals
" × 8
1
1
/
/
"KL
2
2
1
21
Advertisement
Table of Contents
