Repairing Punctures (Drive Wheel With Conventional Motor And Pneumatic Tyres) - Invacare Electric wheelchair Operating Manual

11.1.1 Repairing punctures (drive wheel with conventional motor and pneumatic
tyres)
Injury hazard! If the wheel has been insufficiently tightened during assembly, it can
become loosened during driving!
When reassembling the drive wheels, tighten the Allen screws at a torque of 30 Nm!
Secure all screws using a suitable blocker (e.g. Loctite 243)!
Requirements:
Open-ended spanner 5 mm.
Torque wrench
Repair kit for tyre repair or a new inner tube.
Talcum powder
Screw blocker Loctite (e.g. Loctite 243)
84