Table of Contents
Advertisement
G
F
G N D
A C
A C
F
Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor
H
with a VIDEO IN connector.
G
External sync composite video signal input connector
(VBS IN: BNC type)
Connect to this connector the synchronizing signal output from
I
a synchronizing signal device or the composite signal of a video
distributor.
H
Power indicator (POWER)
Comes on when the power to the camera is on.
I
24 V AC input terminal (24 V AC, GND)
With this camera use only the 24 V AC power adaptor model
No. VPT-115 available from Sanyo.
Power supply connections
Use a 3 wire grounded cable (22 AWG or more), and connect as
shown by the illustration.
CAUTION:
•
To prevent camera and/or AC adaptor failure, pay close
attention to polarity when making the connections.
•
To prevent fire hazard any UL listed wire rated VW-1,
should be used for the 24 V AC cable input terminal.
6
English
Advertisement
Chapters
Table of Contents
