Adjustments - Sanyo VCC-5974 Instruction Manual

ADJUSTMENTS

To enter settings or adjustments for the camera it must be
connected to a monitor. The settings and adjustments are made
by ways of on-screen displays.
Concerning the WRITE PROTECT function
In order to protect the settings and adjustments the WRITE
PROTECT function is set to ON. If it is necessary to enter new
settings or adjustments, press the CURSOR (j or l) button to
select the WRITE PROTECT function setting, then press the
CURSOR (d or c) button to select OFF, then press the SET
button.
CURSOR
CONTENTS OF ADJUSTMENTS
1. SYNC
1-1. V sync phase adjustment.................................................15
1-2. VBS phase adjustment .....................................................16
2. IRIS
2-1. Auto-iris level adjustment ...............................................17
3. BLC
3-1. Setting the light measuring area characteristics (size,
position and distribution) for the MANUAL 1 setting..... 18
3-2. BLC level adjustment for the PRESET 1 setting .............20
4. WHITE BALANCE
4-1. PRESET MODE 2 (indoors, fluorescent lighting) setting
adjustment ........................................................................ 2 1
4-2. MANUAL setting adjustment ..........................................22
5. AGC .................................................................
6. CAMERA ID ....................................................
7. APERTURE ......................................................
CURSOR
SET
(Menu 1)
MENU FOR ADJUSTMENT
SYNC
IRIS
BLC
WHITE BALANCE
AGC
SHUTTER
WRITE PROTECT
NEXT PAGE
23
24
25
14
English
INT
AI
ON
ATW
ON
60
OFF
END