Using The On-Screen Menus - Sanyo VCC-5974 Instruction Manual

USING THE ON-SCREEN MENUS

(Menu 1)
MENU FOR ADJUSTMENT
SYNC
IRIS
BLC
WHITE BALANCE
AGC
SHUTTER
WRITE PROTECT
5
NEXT PAGE
1
To display the menu
Press the SET button for about 3 seconds. The "MENU FOR
ADJUSTMENT" is displayed.
2
To switch between menus and selection
When the setting of a switch in the camera setup section is
changed, the corresponding sub-menu is displayed. To adjust
the values or settings, press the CURSOR (d or c) button to
select the desired value or setting, then press the SET button.
3
Initial values protection (WRITE PROTECT)
ON: Default setting. The initial values cannot be modified.
OFF: Press the CURSOR (d or c) button to select OFF, then
press the SET button. The write protection is cancelled
and the initial values can then be changed.
4
To exit the menu
Press the CURSOR (j or l) button to select END (get it
flashing), then press the SET button.
5
To switch to the second page of the "MENU FOR ADJUSTMENT"
Press the CURSOR (j or l) button to select NEXT PAGE
(get it flashing), then press the SET button.
6
To switch back to the first page of the "MENU FOR
ADJUSTMENT"
Press the CURSOR (j or l) button to select PREVIOUS
PAGE (get it flashing), then press the SET button.
7
To enter a camera ID (CAMERA ID)
(See page 24).
8
Aperture display (APERTURE)
(See page 25).
English
INT
AI
2
ON
ATW
ON
60
3
ON
4
END
13
(Menu 2)
MENU FOR ADJUSTMENT
CAMERA ID
8
APERTURE
WRITE PROTECT
6
PREVIOUS PAGE
CURSOR
(or j)
7
OFF
ON
END
SET
INT
CURSOR
SET
CURSOR
SET
CURSOR
SET