Fujitsu SPARC Enterprise M3000 Product Notes page 37

Software Documentation Updates (Continued)
TABLE 11
Title
XSCF man pages
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF User's Guide
Page Number Update
The usermapmode description in the OPERANDS section will
setldapssl(8)
command be changed as follows:
Enable or disable use of the usermap. When enabled, user
attributes specified with the usermap operand, rather than
userdomain, are used for user authentication.
A part of the description of EXAMPLE6 in the EXAMPLES
section will be changed as follows:
userdomain can only take the form of Distinguished Name
(DN).
XSCF>
'uid=<USERNAME>,ou=yoshi,dc=example,
dc=aCompany,dc=com'
The examples for binddn, bindpw, and searchbase are
added in EXAMPLE7 in the EXAMPLES section.
The description of this feature, described in
and LDAP/SSL" on page
8-19 8.1.10, two sections, "Confirming That the XSCF Firmware Is
Updated When the XSCF Unit Is Replaced (in a System With a
Single XSCF Unit or Both Replacement in a System With
Redundant XSCF Units)" and "Confirming That the XSCF
Firmware Is Updated When the MBU Is Replaced (in the M3000
server) ", the step2 and step3 will be changed as below:
2. If the replacement unit and the replaced unit have different
versions, a message is displayed. In this case, the firmware is
not updated automatically. The operator must match the
number of the firmware versions.
3. When you update, follow the procedure in "Updating XCP
From External Media" or "Updating XCP From the Network"
to update XCP, and confirm the version.
setldapssl userdomain -i 2
2, has not yet been added.
"Active Directory
Information About Software 29