Fujitsu SPARC Enterprise M3000 Product Notes page 36

Software Documentation Updates (Continued)
TABLE 11
Title
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
XSCF man pages
28 SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010
Page Number Update
The following description will be added in EXTENDED
setupfru(8)
command DESCRIPTION:
Although a CMU with two CPUMs can be configured into
Quad-XSB mode on an M8000/M9000 server, the server
generates a "configuration error" message for these XSBs
that do not have a CPUM and memory.
The following description will be added in EXTENDED
showdevices(
8) command DESCRIPTION:
The showdevices(8) command displays a complete list of
devices when executed right after a Solaris OS boot or a DR
operation. However, when executed at other times,
showdevices does not display a complete list if the Solaris OS
has unloaded drivers for any unused devices. To be certain the
displayed list is complete, run the devfsadm command with -v
option on the domain before running showdevices. For more
information about the devfsadm command, see the Solaris
devfsadm(1M) man page.
Following information will be added.
showenvironm
ent(8)
"Airflow volume information is not supported on the
command
M4000/M5000 servers."
"The power consumption information is displayed on the
M3000/M4000/M5000 servers." will be replaced by "The power
consumption information is displayed on the M3000 server."
The example of M3000 server with DC power will be added in
showhardconf
(8) command the EXAMPLES section.
The following information has not yet been added to the
setad(8)
command userdomain description in the OPERANDS section of the
setad(8) man pages:
A user domain can be configured explicitly through the setad
userdomain command on XSCF, or entered at login prompt
using the form, user@domain.
A part of the description of EXAMPLE6 will be changed as
follows:
userdomain can take the form of UserPricipalName (UPN) or
Distinguished Name (DN).
A part of the description of EXAMPLE12 will be changed as
follows:
XSCF> setad dnslocatorquery -i 2
'_ldap._tcp.gc._msdcs.<DOMAIN>.<PORT:3269>'