Safety Labels - Shindaiwa T2500 Owner's/Operator's Manual

Be Aware of the Working Environment
Avoid long-term
operation in very hot or
very cold weather.
Reduce the risk of
bystanders being
struck by flying debris.
Make sure no one is
within 50 feet (15
meters)—that's about
16 paces—of an
operating attachment.
Be extremely
careful of
slippery terrain,
especially
during rainy
weather.
Always make sure
the appropriate
cutting attachment
shield is correctly
installed.
When operating in rocky terrain or near electric wires
or fences, use extreme caution to avoid contacting
If contact is made with a hard object,
such items with the cutting attachment.
stop the engine and inspect the cutting
attachment for damage.
Be constantly alert for objects and debris that could be
thrown either from the rotating cutting attachment or
bounced from a hard surface.
Figure 2

Safety Labels

Safety and Operation Information Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing information labels. New labels are
available from your local authorized Shindaiwa dealer.
Figure 3
4
Make sure bystanders or
observers outside the 50-foot
"danger zone" wear eye
protection.
50
FEET
IMPORTANT
This label indicates the minimum
distance between front handle
and rear grip per ANSI B175.3.
T2500
T2500X