General Safety Instructions; Safety Labels; Kit Contents - Shindaiwa T235 Instructions Manual

Safety Labels

General Safety Instructions

WARNING!
■
When operating with a blade, make sure the handle
is positioned to provide you with maximum protec-
tion from contacting the blade. Always make sure the
handlebar is installed in accordance with the manufac-
turers instruction.
■
NEVER use a cracked or warped blade: If a properly
installed blade vibrates, replace it with a new one and
re-check.

Kit Contents

10
11
8
7
5
6
Safety and Operation Information Labels: Make sure all information labels
are undamaged and readable. Immediately replace damaged or missing
information labels. A new label is provided in this kit and additional labels are
available from your local authorized Shindaiwa dealer. Prior to installing the
new label, Remove old label and clean the outer tube with rubbing alcohol or
similar cleaner.
1
9
3
4
2
IMPORTANT!
■
ALWAYS Shut off the engine immediately if a blade
binds in a cut. Push the branch or tree to ease the
bind and free the blade.
■
Beware of a coasting blade when brushcutting or
edging. A coasting blade can injure while it contin-
ues to spin after the throttle trigger is released or
after the engine is stopped.
#
1.
2.
12
3.
4.
5.
6.
7.
13
8.
9.
10. Bolt 5x12mm
11. Shoulder Harness
12. Caution Label
13. 5 mm lock nut
Description
Barrier Bar
Screw 5x25 mm
Plastic Shield
Shield Plate
Nut 10, left hand
Split Pin 2x22
Adapter Plate, lower
Adapter Plate upper 25 mm
Harness Ring Assembly
Assembly Tool (s)
Qty.
1
3
1
1
1
10
1
1
1
1
1
1
3
3