Redial; Temporary Tone Dialing - VTech CareLine SN6127 User Manual

Telephone operation

Redial

The last 10 telephone numbers dialed (up to 30 digits)
are stored in the system memory.
Each handset stores the last 10 telephone numbers
dialed (up to 30 digits) independently. When there are
already 10 entries, the oldest entry is deleted to make
room for the new entry.
Press REDIAL when the phone is not in use.
1.
or REDIAL repeatedly to browse.
2. Press ,
• Press DELETE to delete a redial entry. You hear
a confirmation
3. When the desired entry displays, press
to dial.
-OR-
1. Press or
Press REDIAL.
2.
or REDIAL repeatedly to browse.
3. Press ,
Press DELETE to delete a redial entry. You hear a confirmation
•
When the desired entry displays, press SELECT to dial or press
4.
CANCEL to exit.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch
from pulse to touch-tone dialing temporarily during
a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long
distance services.
1. During a call, press
2. Enter the number you wish to dial. The telephone sends touch-tone
signals. It automatically returns to pulse dialing mode after you end
the call.
tone.
when the phone is not in use.
.
dialed (up to 30 digits) (up to 30 digits)
or
36
REDIAL #1/9
800-595-9511
tone.