Table of Contents
Advertisement
3. S
ETUP
AC Power
This fixture requires an external power supply, which is included. The included power supply is rated
for an input of 100~240 VAC, 50/60 Hz, and an output of 5 V, 3 A. Before powering on the unit, make
sure the line voltage to which you are connecting it is within the range of accepted voltages.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only as a 0
to 100% switch.
To determine the power requirements for a particular fixture, see the label affixed to the back plate of
the fixture or refer to the fixture's specifications chart. A fixture's listed current rating indicates its
average current draw under normal conditions.
Cirrus™ User Manual
11
2010-08-09
Advertisement
Table of Contents
