Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds - Samsung DVD-V 90K Instruction Manual

VCR

Playing a Sequence Frame by Frame

You can:
VOLUME PROG / TRK
1 Press:
1
2
To return to normal playback, press
VCR

Playing a Sequence at Variable Speeds

You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
The Shuttle function is available on the Remote control
KARAOKE SEARCH
1
Press:
1
1
KARAOKE
2
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE
36
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by frame.
❿
ll to start playing the cassette
❿
ll button one more time to make still mode.
F.ADV/STEP to advance frame by frame
❿
ll.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
( or ) buttons to minimize this effect.
You wish to analyze a sportsperson's technique,
movement by movement.
No sound is heard when playing a sequence at variable
speeds.
❿
ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
SLOW SLOW PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5
X9 X5 X3 X1/10 X1/5
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
Prev
Seq.
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the
Press the OK or ❿.
2
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the
2 Press the OK or ❿.
PLAY
X9
Seq. being Next
played Seq. etc.
1 1 2
or
❷
Go To (0:00:00) option is selected.
or
❷
End Search option is selected.
VCR
OK
1
37