Selecting The Rf Out Sound Mode (B/G-D/K); Setting The Dvd-Vcr Output Channel; Selecting The Colour Mode; Nicam - Samsung DVD-V18000 Instruction Manual

VCR

Selecting the RF OUT Sound Mode (B/G-D/K)

You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
Language : English
1
Install
User Set
Auto Power Off : Off
GB
Screen Messages : On
2
3
Install 4
Auto Setup
Manual Setup
G
TV System : G
5
VCR Output CH : CH 36
K
6
VCR

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Language : English
Also, you can change the DVD-VCR output channel to adjust the
Install
frequency in which information is displayed on the screen.
User Set
Auto Power Off : Off
Screen Messages : On
1
2
3
Install
Auto Setup
4
Manual Setup
CH:21
TV System : G
:
VCR Output CH : CH 36
CH:36
: 5
CH:69
6
24
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the Install
❷
option.
Press the ENTER button to select this option.
Result: The Install menu is displayed.
Press the or buttons, until the TV System option is
❷
selected.
Press the ➛ or ❿ button to select G or K.
On completion, press RETURN to exit the menu.
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
Install
❷
option.
Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
Press the or buttons, until the VCR Output CH option is
❷
selected.
Select the required output channel (CH21~CH69) by pressing the
OK or ❿ buttons.
CH21 . . CH36 . . CH69
On completion, press RETURN to exit the menu.
Then tune your television again (see page 15).

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the User Set
❷
option.
3 Press the OK or ❿ to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding or buttons, until the
❷
option is selected.
System
5 Press the Ok or ❿ button to select
Auto PAL MESECAM
B/W .
B/W Black and White
6
On completion, press RETURN three time to exit the menu.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 40.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the User Set
❷
option.
3 Press the OK or ❿ to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding or buttons, until the
NICAM
❷
is selected.
5 Press OK or ❿, until...
To...
Mono mode Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode is displayed.
On
On: Normally set at this position.
6
On completion, press RETURN three times to exit the menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
GB
Screen Messages : On
User Set
Auto
Colour System : Auto PAL
NICAM : On MESECAM
B/W
IPC : On
Colour
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
option
User Set
Colour System : Auto
On
NICAM : On
Off
IPC : On
25