Operation; Preparation - Canon CR-1 Operation Manual

4. Operation

Concerning the power-saving function
The power-saving function is activated under the following circumstances.
• When none of the switches on the operation panel has been operated, when the stage unit has
When the power-saving function has been activated, the POWER lamp on the operation panel
blinks.
To restore normal operation, press any switch on the operation panel, move the stage to the left or
right or operate the diopter compensation lever.
Concerning control software operations
For details on the control software operations, refer to the operation manual of the control
software.
Note: Before preparing to take photographs, check the sections on the Power Cable
Connections (see page 32), Attaching the EOS Digital Camera (see page 33) and
Connecting the USB Cable (see page 36).

4.1 Preparation

1
Turn ON the computer.
Turn ON the computer, and start the control software.
2 Turn ON the power of the main unit.
Press the power switch to the I side.
The anterior eye observation screen is displayed on the
LCD monitor.
not been switched to the left or right or when the diopter correction slider has not been
operated for 10 or more minutes while power is supplied to the camera
Continued on the following page >>
-9-
R