Guidance And Manufacturer's Declaration For Emc Directive - Canon CR-1 Operation Manual

Safety Information

Guidance and Manufacturer's Declaration for EMC Directive

Electromagnetic Emissions
The CR-1 is intended for use in the electromagnetic environment specified below.
The user of the CR-1 should assure that it is used in such an environment.
Emission Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Compliance
The CR-1 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely
GROUP 1
to cause any interference in nearby electromagnetic
equipment.
Class B
The CR-1 is suitable for use in all establishments other
Class A
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes.
Compliances
Electromagnetic Environment – Guidance
(2)