Remote Feature Access - Inter-Tel USER GUIDE 8524 User Manual

Remote Feature Access

To access your endpoint from another endpoint:
Press
1.
Enter your extension number.
2.
Enter your password followed by
3.
features.
To change the station password using Remote Programming:
Press
a.
Enter the new password, followed by
b.
Enter the new password again for verification, followed by
c.
To turn on Do-Not-Disturb:
Press
a.
Enter message number (01-20) and, if desired, enter the optional second-line
b.
message text.
Press
c.
To turn off Do-Not-Disturb:
Press
To turn on Call Forward:
Press
a.
codes.
Enter an extension number or enter a trunk access code followed by an out-
b.
side telephone number.
Press
c.
To turn off Call Forward:
Press
66
and dial
START 3 5 9
, , and dial
FNC LINE
, , and dial
FNC LINE
.
END
, , and dial
FNC LINE
, , and enter one of the following Call Forward feature
FNC # >
All Calls . . . . . . . . . . . . . . . . .355
If No Answer . . . . . . . . . . . . . .356
.
END
, , and dial
FNC LINE
.
. You can now use any of the following
# >
.
6
.
# >
.
6
, then press .
6 END
If Busy . . . . . . . . . . . . . . . . . . . . . . 357
If No Answer/Busy . . . . . . . . . 358
, then press .
2 END
Inter-Tel
.
# >
®
Model 8524/8525 User Guide