Inter-Tel USER GUIDE 8524 User Manual page 68

Creating Station Speed-Dial Buttons
If your telephone system supports it, you can program the programmable buttons as
speed-dial buttons by selecting a speed-dial number to associate with the button.
NOTE:
Before you program a speed-dial button, you need to store a number in a
speed-dial location (see the previous instructions).
To program a user-programmable function button as a Station Speed-Dial but-
ton:
Press
1.
Press the feature button you want to change into a Station Speed-Dial button.
2.
Dial
3.
When the display asks for a number, dial a digit 0-9. This is the station speed-
4.
dial number "location."
You can now use the procedure outlined on
Speed-Dial button.
To view the current programming of Station Speed-Dial buttons:
Press
1.
Press the Station Speed-Dial button (e.g.,
2.
Press
3.
To erase a station speed-dial name and/or number:
NOTE:
To erase a station-dial name and/or number, you must pre-program the Back-
space button (feature code 314) on your endpoint. Refer to
Feature Buttons section for details on how to program the backspace button.
Press
1.
Dial the location code (0-9) to be erased.
2.
To remove the name: Press the Backspace button (e.g.,
3.
until the name is erased.
Press
4.
To remove the number: Press the Backspace button (e.g.,
5.
until the number is erased.
Press
6.
56
and dial
START 3 9
(default Station Speed Dial feature code).
3 8 2
and dial
START 3 9
to exit.
# >
and dial
START 3 8
to continue.
# >
to exit.
# >
.
7
page 54 to program and use the Station
.
6
) to be viewed.
LINE 9
page
.
3
Inter-Tel
59, Programming You
) repeatedly
FNC 3
) repeatedly
FNC 3
®
Model 8524/8525 User Guide