Display; Sequence; Zoom - EverFocus ECOR2 User Manual

3.9 DISPLAY

Press the Display button
keys and pressing 'Enter'. Pressing/clicking cycles through the four OSD formats:
1. Press to show camera information. Please see the following table for camera information icons.
Recording
Alarm
3. Press again to show status information. Please see the following table for status representation.
Alarm
Motion
4. Press again to show both status information and camera information.
5. Press again to hide all information.

3.10 SEQUENCE

1. By mouse: Click Sequence button
2. By front panel: Press the Sequence button on front panel to enter the auto sequential switching mode.

3.11 ZOOM

1. Make sure no camera is in playback mode
2. Select one camera
on the menu by using the mouse or selecting this icon with the front panel
Playback Fast forward
Motion Video loss
Audio Event
Video loss No network
to enter the auto sequential switching mode.
Fast backward
Express copy
HDD failure
28
Back pause
Audio out
HD temp. too high Seq.