EverFocus ECOR264-D2 Quick Reference Manual

Operating elements
DVD+RW: DVD+RW burner for DVD model. (D models only)
1
◄◄/◄I : Fast reverse playback or step reverse playback depending on
2
playback mode.
3
◄/ II: Reverse playback or pause
►/ II: Forward playback or pause
4 4
►►/I►: Fast Forward playback or step forward playback depending on playback mode.
5
Enter/ Arrow keys: Instead of or in combination with a mouse, you can use these
6
keys to change the Menu settings.
7
Menu/ESC: Press this key to enter/exit MAIN SETUP MENU.
USB 2.0 (front): For connecting USB-Flash-Drive to copy/archive video or for
8
firmware upgrades.
Channel keys 1~8 (1~4):
9
- Press channel key (CH1~CH8) / (CH1~CH4) to display that channel in full screen view.
- Press channel key again for 2x electronic zoom.
10 Live: Press this key to show live view. Press to exit from playback mode.
View: Press this key to switch between 4x, PiP (Picture In Picture), full screen and 9x.
11
Note: 1. PIP display is not available in playback mode.
2. This key is also used for BNC and VGA selection at the initial setup.
SEQ: Press this key to enter the auto sequential switching mode. The sequence
12
dwell time can be set in "Display Setting" tab of the Menu.
13 Search: Press this key to enter Search Menu.
Copy: Press this key to enter Copy Menu.
14
ECOR264-D2 Quick Reference Guide
15
Power LED: This LED ON indicates Power on.
16 Alarm LED: This LED ON indicates Alarm active.
17 HDD LED: This LED ON indicates HDD active.
18 Network LED: This LED ON indicates Network active.
Description of on-screen main menu (control bar)
4
1 2 3
1 Express menu (manual chapter 4.2)
Camera menu (manual chapter 4.3)
2
3 Record & Play menu (manual chapter 4.4)
4 Alarm & event menu (manual chapter 4.5)
5 Schedule menu (manual chapter 4.6)
6 Network menu (manual chapter 4.7)
Disk menu (manual chapter 4.8)
7
8
Display menu (manual chapter 4.9)
9 System menu (manual chapter 4.10)
10
Information menu (manual chapter 4.11)
6 7 8
5
P/N: 4605XECR04002AR_Ver.A
9 10