U S To M I Z I N G T H E Dv D F U N C T I O N Settings; Language Setup; Video Setup; System Setup - Venturer PLV3117i Owner's Manual

CUSTOMIZING THE DVD FUNCTION SETTINGS

language seTuP

1. Press the seTuP button in stop mode.
2. Use the button to change the highlight cursor. Use the
to select an option, then press the
preferred language, then press the enTer Ok button. The screen will
change to your selected language immediately.
3. To exit the DVD SETUP MENU and return to the normal screen, press
the seTuP button.

ViDeO seTuP

1. Press the seTuP button in stop mode.
2. Press the or button repeatedly until the ViDeO seTuP appears.
3. Use the or button to select an option, then press the
the or button to adjust, then press the enTer Ok button. (The
screen will change to your selected setting).
4. Repeats steps 2 and 3 above to adjust other options.
5. To exit the DVD SETUP MENU and return to the normal screen, press
the seTuP button.

sysTem seTuP

1. Press the seTuP button in stop mode.
2. Press the or button repeatedly until the sysTem seTuP appears.
3. Use the or button to select the desired option, then press the
button to adjust, then press the enTer Ok button. (The
Use the or
screen will change to your selected setting).
4. Repeats steps 2 and 3 above to adjust other options.
5. To exit the DVD SETUP MENU and return to the normal screen, press
the seTuP button.

TV Type

Pan Scan
• When wide-screen video is played, this mode clips the right and left sides
of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands top and bottom).
Letter Box
• When wide-screen video is played in this mode on a conventional screen,
black bands appear at the top and bottom of the screen.
Wide screen
• This is the correct mode for playing wide-screen videos on a wide-
screen.
notes:
• The displayable picture size is preset on the DVD. Therefore the playback
picture of some DVDs may not conform to the picture size select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback
picture will always appears in the 4:3 aspect ratio regardless of the TV
TYPE setting.
• TV TYPE will always change to Wide screen after you switch off the unit.

Default

It takes 3-5 seconds to reset the DVD settings to the factory default.
or
and / button to select your
button. Use
E - 22
.....
button
.....
button.
Cut off when a wide-screen
video image is played.
Pan Scan
Letter Box
Wide Screen