Connecting An Audio Amplifier; Connections; Connecting Headphones; Sound System - Venturer PLV3117i Owner's Manual

connectionS

cOnnectInG an aUdIO amPlIFIeR

This connection allows you to use an audio amplifier
and external speakers.
Connect the right (red) and left (white) audio OUTPUT
from this unit to the right (red) and left (white) audio
INPUT on your amplifier. Refer to your amplifier's user
manual for more information.
note:
To control the audio, both the TV and the amplifier must
be turned on, and the volume of the amplifier must be
set above 0, or you will not hear any sound.
If you want to hear the sound from the amplifier only,
press the VOl – button on the TV to decrease the volume
or press the mUte button on the remote control to turn
off the sound.

cOnnectInG HeadPHOneS

• Turn down the volume before connecting headphones
to the unit, then adjust the volume to your desired
level.
• When headphones are connected, no sound will
come from the front speakers.
note:
Avoid listening to sound at high levels for prolonged
periods of time. This may be harmful to you and may
cause hearing loss.

Sound SySteM

dOlBy dIGItal (FOR dVd)
Dolby Digital is a sound system developed by Dolby Laboratories Inc.
This unit automatically recognises DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for
this logo on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D
Laboratories.
symbol are trademarks of Dolby
E - 15