Related Manuals for Venturer PLV76156
Summary of Contents for Venturer PLV76156
-
Page 1: Instruction Manual
PLV76156 15” LCD TV INSTRUCTION MANUAL Need More Help? DO NOT RETURN THIS PRODUCT TO THE STORE Please visit online help at http://www.venturer.com E - 16 PLV76156S7_IB_UL_090727.indd 16 7/28/2009 09:44:22... -
Page 2: Safety Precautions
SAFETY PRECAUTIONS CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat. -
Page 4: Quick Installation
QUICK INSTALLATION Before turning on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown. 2 3/8" 1. Connect the TV antenna. 2. Connect the power cord. 3. Press the / ON button to turn on the unit. 4. Press the / button to highlight Antenna, then use the ENTER or button to select “Air”, “Cable STD”, “Cable HRC”, “Cable IRC” or “Cable Auto“. 5. Use the / button to highlight Auto Scan, then press the ENTER or button to confirm. -
Page 5: Table Of Contents
CONTENTS SAFETY PRECAUTIONS ... 1 IMPORTANT SAFETY INSTRUCTIONS ... 2 QUICK INSTALLATION ... 3 CONTENTS ... 4 ACCESSORIES ... 4 GETTING STARTED ... 4 CONTROL REFERENCE GUIDE ... 5 - 6 CONNECTIONS ... 7 - 8 Connecting a TV Antenna ... 7 Connecting To A VCR / Camcorder / Video Game System / Cable / Satellite System ...7 Connecting the power cord ... 8 ACCESSORIES Please check and identify the supplied accessories. -
Page 6: Control Reference Guide
CONTROL REFERENCE GUIDE REMOTE CONTROL PLV76156S7_IB_UL_090727.indd 5 MUTE Button Press to turn off the sound. MENU Button Press to display the on-screen menu or switch back to the previous menu screen. CURSOR ( , ) Buttons Use to highlight selections on a menu screen and adjust certain settings. ENTER Button Confirm selection on a menu screen. DISPLAY Button Press to display information on the current channel. - Page 7 CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. AUDIO IN (Left/Right) / VIDEO IN jacks / ON button Turns the unit on and off. 3. MENU button Enters the on-screen TV menu. 4. FUNCTION button Selects TV / AV. 5. CH / CH buttons Press to confirm selections on the TV menu screen and / to change TV channels. 6. VOL + / VOL - controls Adjusts the volume level and highlights selections (Left & Right) on the TV menu screen.
-
Page 8: Connections
CONNECTIONS CONNECTING A TV ANTENNA To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system NOTE For optimal reception of over-the-air TV broadcasts, we recommend that you use an external fixed antenna. If using an indoor antenna, please ensure that you purchase an antenna with sufficient ability to receive signals in your home. Orientation and location of the antenna is typically critical for best results – you may find that placement of the antenna near a window, or in an elevated location, improves performance. CONNECTING TO A VCR / CAMCORDER / VIDEO GAME SYSTEM / CABLE / SATELLITE SYSTEM Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from the AUDIO/VIDEO OUT jack of the other equipment to AUDIO/... -
Page 9: Connecting The Power Cord
CONNECTIONS CONNECT ThE POWER CORD • Connect the AC power cord into a wall outlet. • Press the / I button on the unit or remote control to turn on the unit. NOTE • Be sure the AC power cord is disconnected and all functions are off before making connections. • Make sure that all the components are connected correctly. • To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert. • When you are not going to use the unit for a long period of time, disconnect the power cord. USING hEADPhONES / EARPhONES • Turn down the volume before connecting headphones / earphones to the unit, then adjust the volume to your desired level. -
Page 10: Installation
INSTALLATION INSTALLING / REMOVING ThE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack. 1. Disconnect all cables or cords connected to the unit. 2. Lay the unit down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. -
Page 11: Tv Setup
TV SETUP PICTURE MENU 1. Press the MENU button. 2. Press ENTER or button to highlight Picture Mode. 3. Use the or button to select other options (Contrast, Brightness, Sharpness, Color, Tint, Aspect Ratio & Color Temperature). 4. Use the ENTER or button to make adjustment. The screen will adjust to your selected setting immediately. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the TV SETUP MENU and return to the normal screen, press the MENU button. Picture Mode: Select from preset screen display settings to match the type of show you are watching (Standard, Movie, Soft & Personal). Contrast: Adjust to sharpen the picture quality. The dark portions of the picture become richer in darkness and the light portions become brighter. Brightness: Adjust to brighten or darken the whole picture. -
Page 12: Tv Menu
TV SETUP TV MENU 1. Press the MENU button. 2. Use the or button to select TV setting. 3. Press ENTER or button to highlight Antenna, then use the or button to select other options (DTV Signal, Auto Scan, Auto Scan Add CH, Channel Skip & Channel Labels). 4. Use the ENTER or button to make adjustment. The screen will adjust to your selected setting immediately. -
Page 13: Setup Menu
TV SETUP SETUP MENU 1. Press the MENU button. 2. Use the or button to select Setup setting. 3. Press ENTER or button to highlight Time Setting, then use the or button to select other options (Time Setting, Sleep Timer, Password Setting, Parental Control, Closed Caption, OSD Language & Reset). 4. Use the ENTER or button to make adjustment. -
Page 14: Troubleshooting Guide
TROUBLEShOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. Ensure the AC power cord is connected. • • The unit is not turned on. The remote does not • Remove any obstacles between the remote and the unit. function. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the batteries in the remote with new ones. Bad Picture (snow, • Check the location of the antenna and adjust it if necessary. multiple images, • Make sure the antenna cable is firmly connected. distortion, blurry) • Make sure all input cables are firmly connected. Black and white • Check the PICTURE SETTING within the TV SETUP MENU. picture. • Check to make sure the program you are watching is broadcast in Color and not Black & White. No picture or sound. • Make sure the unit is plugged in and turned on. • Make sure that TV mode is selected. - Page 15 During a period of ninety (90) days from the effective warranty date, VENTURER will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support Center at 1-800-252-6123 or 1-866-444-6478, during the hours listed in the box below. The determination of service will be made by VENTURER Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO VENTURER WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by VENTURER at its designated Service Center for ninety (90) days from the effective warranty date. Such replacement parts or products are warranted for an additional ninety (90) days from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility. Packaging and Shipping Instruction When you send the product to the Venturer service facility you must use the original carton box and packing material or an equivalent as designated by VENTURER.
- Page 16 UNIT INCH 5 7/8 Printed in China 811-761591W020 E - 15 PLV76156S7_IB_UL_090727.indd 15 7/28/2009 09:41:15...