Sequence Setup Mode - Digimerge DHU500R Series Instruction Manual

Display Menu

SEQUENCE SETUP MODE

1. Press the ENTER button. Setup
Mode is active.
3. Press the Number Keys to Select
channels to be displayed in Sequence
(all squares must have an assigned
number) / Right click to choose CH.
5. Press the RETURN button when
complete. Select SAVE & EXIT /
Right Click to Exit.
32
2. Select the Display Mode (5 different
Display Options - Single, Quad, 6, 8A
& 8B) / Left Click to change.
4. Choose the next Display Mode (up
to 16 additions).
6. Press the SEQ button on the Front
Panel to switch to Sequence display.