How Do I Playback Previously Recorded Data - Digimerge DHU500R Series Instruction Manual

How do I playback Previously Recorded Data? - Appendix #11
How do I playback Previously Recorded Data? - Appendix
#11
Search mode allows you to locate previously
recorded video by Date and Time, or by Event
Type.
• Press the Search Button on the front panel
or Remote Control
• Enter the User Name and Password (if
required).
• Use the Left / Right arrows on the Front
Panel or Remote Control to switch
between the Search By Time and Search
By Event screens.
Search By Time
Searches the system based on date and time.
• Press the Enter button to access the
Calendar (on the left side of the
screen)
• Navigate within the calendar using the
Arrow Keys on the front panel or
remote control.
• Once the date has been located, press
the Enter button to accept the date,
and to access the Time Search (on the
right side of the screen).
• Press and Hold the arrow keys to select
the Time (increments of 1 minute).
Pressing the button without holding
will increment 15 minutes.
• Press the Enter button to start the
playback. Press the Return button to
stop playback and return to the Search
By Time screen.
The Date and Time will be displayed at
the bottom of the screen. A playback icon
will appear indicating that the unit is in
Playback mode.
NOTE: The unit will continue to record data
while in Playback Mode.
82
Any days highlighted with GREEN
indicate that there is recorded video data.