Event / Sensor; Hdd Event - Digimerge DHU500R Series Instruction Manual

Event / Sensor

The Event Sensor Setting controls contain:
HDD EVENT - Checks the Hard Drive for
errors.
ALARM IN - Configuration settings for an
external Alarm sensor (i.e. Door / Window
Sensors).
ALARM OUT - Sends a signal to an external
device when an alarm is detected.
BUZZER OUT - Turns the audible Buzzer
ON/OFF for selected event types.
E-MAIL NOTIFICATION - Sends and E-Mail
notification when a selected event occurs
(based on User Configuration settings).

HDD EVENT

• Smart Alarm - Sets the Smart Alarm ON/
OFF. An alarm occurs when errors are
detected with the drive.
• Check Interval - Sets the Hard Drive
check interval (1~24 hrs). This setting
allows the System to self-check the
drive for any errors, and generate an
Alarm if drive errors are found.
Event / Sensor
45