Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model purchased.
®
Smart Control Panel
Motor Unit with Light Lenses
Chain Spreader
Chain Pulley
Bracket
The Protector System
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Reversing Eye)
with 2-Conductor White & White/Black
Bell Wire attached
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Washered Bolt 5/16"-18x1/2" (2)
3-Button Remote Control
Model 895MAX (1)
Trolley
®
If anything is missing, carefully check the packing
material. Parts may be stuck in the foam. Hardware for
installation is also listed below.
Remote Control
Chassis
Visor Clip
Support
Bracket
Header Bracket
Rail
2 Conductor Bell Wire
White & White/Red
Safety Reversing
Sensor Bracket (2)
Extension
Bracket (2)
Hex Bolt 1/4"-20x5/8" (4)
Hex Screws 8-32x1" (2)
Screw #8-32x3/8"
Insulated Staples (10)
Ring Fastener (3)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Lock Nut 1/4"-20
Lag Screw 1/4"x1-1/2" (4)
Rope
Handle
5
Chain
Door Bracket
Curved Door
Arm Section
Straight Door
Arm Section
Safety Labels
and
Literature