Carton Inventory; Hardware Inventory - Chamberlain LiftMaster SECURITY+ 2500 Owner's Manual

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and the parts illustrated
below. Note that accessories will depend on the
Multi-Function
Door Control Panel
Model 79LM
Header Bracket
Curved Door
Arm Section
Belt
Pulley Bracket

Hardware Inventory

INSTALLATION HARDWARE
Hex Screw #8 x 3/8" (3)
Hex Bolt 5/16"-18 x 7/8" (4)
Lag Screw 5/16"-9 x 1-5/8" (2)
Lag Screw 5/16"-18 x 1-7/8" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Clevis Pin 5/16" x 2-3/4" (1)
Clevis Pin 5/16" x 1-1/4" (1)
Clevis Pin 5/16" x 1" (1)
Nut 5/16" - 18 (4)
Remote Control
Transmitter Visor Clip
Light Lens
One-Piece
T-rail
Door Bracket
Trolley
Safety Sensor
Bracket (2)
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
foam. KEEP THE FOAM INTACT (see page 6.)
SECURITY✚
3-Channel Remote Control
2-Conductor Bell Wire
White & White/Red
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Safety Labels
and
Literature
Lock Washer 5/16" (4)
Screw 6AB x 1-1/4" (2)
Screw 6-32 x 1" (2)
Insulated Staples (30)
Ring Fastener (3)
Handle
Dry Wall Anchors (2)
Rope
Carriage Bolts 1/4" - 20 x 1/2" (2)
Wing Nut 1/4" x 20 (2)
5
Belt Cap Retainer
Styrofoam
Belt
Straight Door
Arm Section