Sherwood RD-5405 Operating Instructions Manual page 22

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 22
Manual presetting
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual tuning.
2.
Press the ENTER button.
• "MEM" is flickering for several seconds.
3.
Select the desired preset number (1~30) and press the
ENTER button.
• When using the NUMERIC buttons on the remote control.
Examples) For "3" :
For "15" :
For "30" :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is stored
automatically without pressing the ENTER button.
• A stored frequency is erased from the memory by storing
another frequency in its place.
• If "MEM" goes off, start again from the above step 2.
4.
Repeat the above steps1 to 3 to memorize other
stations.
■MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Tuning to preset stations
• After selecting the tuner as an input source, select the
desired preset number.
• When using the NUMERIC buttons on the remote control.
Examples) For "3" :
For "15" :
For "30" :
22