Sherwood RD-5405 Operating Instructions Manual page 18

RD-5405(A)_ENG100217_RD-5503(g) 2010-03-30 오전 10:53 페이지 18
Adjusting each channel level with test tone
• The volume level of each channel can be adjusted easily with the test tone function.
1.
Enter the test tone mode.
• The test tone mode is displayed and will be heard from the
speaker of each channel for 2 seconds as follows:
→ FL → C →
Front Left Center
• When the speaker setting is "N (None or No)", the test
tone of the corresponding channel is not available.
→ → →
FR SR SL
Front Right Surround Right Surround Left Subwoofer
2.
At each channel, adjust the level as desired until the
sound level of each speaker is heard to be equally
loud.
• You can select the desired channel with the CURSOR
UP(▲)/DOWN(▼) buttons.
3.
SW
Cancel the test tone function.
18