Other Functions - Sherwood R-945MKII Operating Instructions Manual

Memorize it within 5 seconds.
5
VCR1 REC
LDP
SOURCE
VIDEO SOURCE AUDIO SOURCE
In the above step, if 5 seconds elapses, repeat again
from the step 1.

OTHER FUNCTIONS

Compressing the dynamic range
(Dolby Digital (AC-3) mode only)
This function compresses the dynamic range of
previously specified parts of the Dolby Digital
(AC-3) sound track(with extremely high volume) to
minimize the difference in volume between the
specified and non-specified parts.
This makes it easy to hear all of the sound track
when watching movies at night at low levels.
DYNAMIC RANGE
Then the DYNAMIC RANGE indicator lights up.
Press again to cancel.
In some Dolby Digital(AC-3) softwares, this
function may not be used.
MEMO / ENTER
Start recording on the VCR 1.
6
Start play on the LDP.
7
Start play on the CDP.
8
The audio signal from CDP and the video
signal from LDP will be dubbed onto the
tape in VCR 1 and you can enjoy them on
the TV set and from the speakers.
Operating the sleep timer
The sleep timer allows the system to continue to operate
for a specified period of time before automatically
shutting off.
To set the receiver to automatically turn off after the
specified period of time.
SLEEP
Each time this button is pressed, the sleep time changes
as follows ;
10 20 30 60 90 OFF
When the sleep time is selected, all display panels of
Sherwood components connected by the DIGI LINK
are dimly lit.
Checking the brightness of the
fluorescent displays
In the display OFF mode, when any button is pressed,
the receiver switches to the display ON mode.
25
or
Unit : Minutes
Each time this button is pressed,
the brightness of all fluorescent
displays of Sherwood
components connected by the
DIGI LINK III changes together
as follows;
ON dim OFF