Integra DTR-8.4 Instruction Manual page 83

DTR-8.4_En.book Page 83 Thursday, October 16, 2003 11:09 AM
Net-Tune —Continued
Note:
• This procedure can also be performed by using the
DTR-8.4's input selector buttons, [Setup] button,
[ ]/[ ]/[ ]/[ ] buttons, [Enter], and [Return]
button.
5-1. IP Address
■ a. DHCP/AUTO IP
This setting determines whether or not the DTR-8.4 uses
DHCP and AutoIP to automatically configure the IP
Address, SUBNET Mask, Gateway, and DNS Server set-
tings.
On: Use DHCP/Auto IP (default).
Off: Don't use DHCP/Auto IP.
If you select Off, you must configure the IP Address,
SUBNET Mask, Gateway, and DNS Server settings
yourself. Otherwise, Net-Tune won't work.
■ b. IP Address
You must specify an IP address if you set the DHCP/
AUTO IP setting to Off.
Enter a static IP address provided by your ISP.
The IP address must be within the following ranges. Net-
Tune will not work with IP addresses outside of these
ranges.
Class A: 10.0.0.0 to 10.255.255.255
Class B: 172.16.0.0 to 172.31.255.255
Class C: 192.168.0.0 to 192.168.255.255
Most routers use Class C IP addresses.
■ c. SUBNET Mask
You must specify the subnet mask IP address if you set
the DHCP/AUTO IP setting to Off.
Enter the subnet mask IP address provided by your ISP
(typically: 255.255.255.0).
■ d. Gateway
You must enter a gateway IP address if you set the
DHCP/AUTO IP setting to Off.
Enter the gateway IP address provided by your ISP.
■ e. 1st DNS Server, f. 2nd DNS Server
You must enter the DNS server IP addresses if you set
the DHCP/AUTO IP setting to Off.
Enter the DNS server IP addresses provided by your ISP.
If your ISP supplied only one DNS address, enter it in
the e. 1st setting.
5-2. Proxy Setup
If you use a proxy server with your Internet connection,
you must enter the proxy server settings provided by
your ISP.
■ a. Proxy Server
This setting determines whether or not the DTR-8.4 uses
a proxy server for Internet radio.
On: Use proxy server.
Off: Don't use proxy server.
■ b. Proxy Address
You must enter an IP address for a proxy server if you set
the Proxy Server setting to On.
Enter the proxy server IP address provided by your ISP.
■ c. Proxy Port
You must enter an IP address for a proxy server if you set
the Proxy Server setting to On.
Enter the proxy port IP address provided by your ISP.
5-3. Mac Address
■ a. MAC Address
You can check the DTR-8.4's MAC (Media Access Con-
trol) address. This address cannot be changed.
5-4. Client Setup
A network typically consists of a server and several cli-
ents. On a Net-Tune network, the network audio server
is the server and the DTR-8.4 is the client.
■ a. Client Name
You can check the DTR-8.4's client name. This name is
preset at the factory and cannot be changed.
■ b. Wakeup on LAN
This setting determines whether or not the DTR-8.4
maintains its network connection while its on Standby.
On: Maintain network connection.
Off: Close network connection while on Standby
(uses less power).
■ c. NTSP Port
This is the TCP/IP port number that is used for commu-
nication with the network audio server. To enable com-
munication, this port number must agree with the port
number setting in network audio server. Unless you have
a special reason for doing so, don't change this number.
83