Aiming The Remote Control; Using The Remote Control Holder; Programming Your Existing Universal Remote Control To Work With Your Tv - Insignia NS-19E450WA11 User Manual

3 Replace the cover.
Warnings
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Aiming the remote control

To aim the remote control:
• Point the remote control toward the remote
control sensor on the front of your TV.
16.4 ft. (5 m)
Notes
• Do not expose the remote control to shock.
• Do not expose the remote control to liquids and
do not use the remote control in an area with
high humidity.
• Do not place the remote control in areas of high
heat or direct sunlight. The heat may warp the
battery case.
• The remote control may not work correctly if
sunlight or bright light is shining on the remote
control sensor. To correct this problem, move
your TV or use the remote control closer to the
remote control sensor.
8
NS-19E450A11/NS-19E450WA11/NS-22E450A11/NS-22E455C11 Insignia 19"/22" LED-LCD HD TV
www.insigniaproducts.com

Using the remote control holder

Your TV comes with a remote control holder you
can put the remote control in when you are not
using it. You can put the holder on a table or mount
it on a wall.
Note
Different types of walls may require different types of
screws. If you want to wall mount the remote control
holder, make sure that you use the correct screws for
the type of wall. (Screws are not provided.)
Programming your existing universal remote
control to work with your TV
You can operate your Insignia TV with a new or
existing universal remote control.
To program a universal remote control:
1 See the table below for common codes. If you
have problems programming your remote or
need a different remote control code, visit
www.insigniaproducts.com for the latest
remote control code information.
Insignia TV codes for universal remote controls
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makes and models
Philips PHDVD5, RCA
PH5DSS,
RCU807
PMDVR8, PDVR8
115 135
Set-top box makes and models
Comcast Dish Network
M1057 VIP508, VIP622
0463 720
Codes for other remote controls are available
online at:
www.insigniaproducts.com
Tips
• The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
• If your universal remote control isn't listed on
the chart, refer to your universal remote
control's instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
One for All Sony
URC-6690 RM-VL600
8043
0464
Motorola TIVO DirectTV
DRC800 Series 3, HD RC23
0463 0091 10463