Insignia NS-19E450A11 Quick Setup Manual

19"/22" LED-LCD HDTV

QUICK SETUP

GUIDE
NS-19E450A11/NS-19E450WA11/
NS-22E450A11/NS-22E455C11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control and
2 AAA batteries
Audio Component Remote
cable cable control holder
TV stand and 3 screws
Quick Setup Guide
Front features
INPUT MENU CH VOL
Remote Power
control sensor indicator
INPUT MENU CH
Note:
To turn on your TV using the (power) button on your TV, press . Your TV turns
on and the button labels ( , INPUT, MENU, CH / CH , and VOL+ / VOL–) light
on the front of your TV. A "Please Wait" message appears for a few seconds, then
your TV displays the normal TV broadcast.
If your TV is turned on and the button labels on the front of your TV are not lit, press
any button except to light the button labels. Then press the button you want.
Button presses must be within 10 seconds of each other.
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Secure the stand to the screen with three screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the two screws securing the stand column to the TV, then remove the
stand column.
3 Secure the wall-mount bracket to the back of your TV using the screws provided
with the wall mount. screws. Wall-mount bracket and screws are not provided.
Setting up your remote control
1 Press down on the battery compartment cover lock, then remove the remote
control cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your remote control
To program your existing universal remote control to work with your new Insignia
TV, see the table below for common codes. If you have problems programming
your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony Comcast Dish Network Motorola TIVO
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
115 135 0464 8043 0463 720 0463 0091
To program your universal Insignia remote control to work with other devices in
the home, see your user guide or visit www.insigniaproducts.com.
Connecting a DVD or Blu-ray DVD player, cable box,
satellite receiver or, game station
Using HDMI (best)
VOL
Using component (better)
Using composite (good)
AUDIO/VIDEO OUT
DirectTV
RC23
10463
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN on the back of
your TV and the RF OUT jack on the antenna.
Connecting a Home Theater System
Using digital audio
Connecting power
Plug the AC power cord into a power outlet.