Using The Remote Control; Installing The Remote Control Batteries; Aiming The Remote Control - Insignia NS-L32Q-10A - 32" LCD TV User Manual

# Button Description
Press to list all the recorded programs in a PVR/STB.
You need to program the remote control to control
27
PVR/LIST
connected devices. For more information, see
"Programming your remote control" on page 32.
Press to fast forward on DVD, DVR, PVR, or CD devices.
You need to program the remote control to control
28
(fast forward)
connected devices. For more information, see
"Programming your remote control" on page 32.
In DVD, DVR, PVR, or CD mode, press to skip forward to
the next title or track. You need to program the remote
/ (skip
29 control to control connected devices. For more
forward)
information, see "Programming your remote control"
on page 32.
Press to freeze the video image. Press again to
unfreeze the image. For more information, see
"Freezing the picture" on page 18.
30
/FREEZE
Caution: Do not freeze the video image for long
periods of time. You may damage the TV screen.
Press to go change TV channels. For more information,
31 CH /CH
see "Selecting a channel" on page 17.
Press to mute the sound. Press again to restore the
32
MUTE
sound.
Press to enter a digital sub-channel number. For more
33 —
information, see "Selecting a channel" on page 17.
Press to turn closed captioning on or off. You can select
CC Off, CC On or CC On when Mute. For more
34 CCD
information, see "Viewing closed captioning" on
page 27.
If Parental Lock is turned on, when you enter the
35 P-LOCK correct password to unblock the channels, you can
press P-LOCK to block the channels again.
Press to select the aspect ratio. For more information,
36 ZOOM
see "Adjusting Advanced Video settings" on page 18.
Press to select the video modes. You can select Vivid,
Standard, Energy Savings, Theater, Sports, or
37 PICT
Custom. For more information, see "Adjusting the TV
picture" on page 18.

Using the remote control

Installing the remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
8
2 Insert two AA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery cover.
Cautions
Notes

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
Notes
www.insigniaproducts.com
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
sensor on the front of your TV.
• Do not expose the remote control to shock or
liquids.
• Do not use the remote control in an area with
high humidity.
• Do not place the remote control in direct
sunlight.
• Do not place objects, such as furniture, between
the remote control and the remote sensor.
• The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the angle
at which you use the remote control.