Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-50L260A13 User Manual

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
20

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
www.insigniaproducts.com
NS-50L260A13 Insignia 50" LCD TV
16.4 ft. (5 m)