Remote Control; Using The Remote Control; Installing Remote Control Batteries - Insignia NS-19E450WA11 User Manual

Insignia 19"/22" LED-LCD HD TV

Remote control

# Button Description
Press to turn on your TV. Press again to put your TV in
standby mode.
1
When your TV is in standby mode, power still flows
(power)
through it. To completely disconnect power, unplug
the power cord.
Press to select the device connected to the
2 COMPONENT IN or AV IN VIDEO jacks as the video
COMP/AV
input source.
Press to enter channel numbers or the parental control
3
Numbers
password.
Press to select a digital sub-channel. For more
4
information, see "Selecting a channel" on page 16.
Press to turn off the sound. Press again to turn the
5
MUTE
sound back on.
6
VOL+/VOL– Press to increase or decrease the volume.
7
CH-LIST Press to display the channel list.
Press to open the Input Source list. For more
8 information, see "Selecting the video input source" on
INPUT
page 15.
9
MENU Press to open the on-screen menu.
Press to open a sub-menu or to confirm selections in
10 the on-screen menus. For more information, see
ENTER
"Navigating the menus" on page 16.
# Button
11
12
MTS/SAP
13
AUDIO
14
PICTURE
15
HDMI
16
TV
17
RECALL
18
CH
19
FAVORITE
20
GUIDE
21
INFO
22
EXIT
23
CCD
24
SLEEP
25
ZOOM
26
INlink control buttons

Using the remote control

Installing remote control batteries

To install the remote control batteries:
1 While pressing the release button on the battery
2 Insert two AAA batteries into the battery
www.insigniaproducts.com
Description
Press to navigate in on-screen menus. For more
information, see "Navigating the menus" on page 16.
Press to select the audio mode for an analog channel.
Press to select the audio track for a digital channel if
more than one audio track is available.
For more information, see "Selecting the audio mode"
on page 19.
Press repeatedly to toggle between the bass and
treble settings screens where you can adjust the
settings.
Press to select the picture mode. For more
information, see "Adjusting the TV picture" on
page 17.
Press once to select the device connected to the
HDMI1 jack as the video input source. Press twice to
select the device connected to the HDMI2 jack. Press
three times to select the device connected to the
HDMI3 jack.
Press to select the TV as the video input source.
Press to go to the last viewed channel.
Press to go to the previous or next channel in the
channel list. For more information, see "Selecting a
/CH
channel" on page 16.
Press to open the favorite channel list. For more
information, see "Viewing a favorite channel" on
page 21.
Press to open the program guide for digital channels
(if available). For more information, see "Viewing
channel information" on page 16.
Press to display the channel banner. For more
information, see "Viewing channel information" on
page 16.
Press to close the on-screen menu.
Press to turn closed captioning on or off. For more
information, see "Turning closed captioning on or off"
on page 27.
Press to set the sleep timer. For more information, see
"Setting the sleep timer" on page 29.
Press to select the aspect ratio. For more information,
see "Adjusting the TV picture" on page 17.
Press to control INlink devices. For more information,
see "Using INlink" on page 31.
compartment cover on the back of the remote,
lift the cover off the remote.
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
7