Understanding The Basics; Turning Your Tv On Or Off - Insignia NS-19E450WA11 User Manual

6 If you selected Auto for Mode, press
highlight Daylight Savings, then press
to select On (if your viewing area observes
Daylight Savings Time) or Off (if your viewing
area does not observe Daylight Savings Time).
7 If you selected Manual for Mode, set the date
by pressing or
Day, then press
8 If you selected Manual for Mode, set the time
by pressing or
pressing or
AM/PM field. Press
9 Press ENTER. The Choose your Picture Mode
screen opens.
Choose your Picture Mode
OK
MOVE
ENTER
Reduces total power consumption
10 Press or to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message appears
"If you select Retail Mode, then Energy saving is
not realized. " Select Yes to continue, or select No
to change your selection.
The Choose your TV source screen opens.
Choose your TV source
Antenna
Cable
Cable/Satellite Box
Scan for Digital Channels..
OK
MOVE
ENTER
Select Antenna if using an antenna for standard or HD TV
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
14
NS-19E450A11/NS-19E450WA11/NS-22E450A11/NS-22E455C11 Insignia 19"/22" LED-LCD HD TV
or
to highlight Year, Month, or
or to adjust the setting.
to highlight Time, then
to to select the hour, minute, or
or to adjust the setting.
Home Mode
Retail Mode
SELECT PREVIOUS
MENU EXIT
0
Analog Channels
0
Digital Channels
SELECT PREVIOUS
MENU EXIT
www.insigniaproducts.com
to During auto channel search, your TV searches
or for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Yes to continue searching for analog
channels, or select No to stop searching for
channels.
Note
12 To watch TV, press INPUT, press
highlight TV in the Input Source list, then press
ENTER.
Note

Understanding the basics

Note
EXIT

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press
indicator LED turns blue.
3 Press
TV enters Standby mode and the power
indicator LED turns red.
Warning
Note
EXIT
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
You can select a different video input source.
Unless otherwise noted, all tasks in this section are
based on using the remote control.
(power) to turn on your TV. The power
(power) again to turn off your TV. Your
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
or to