Display; Setting Up Your Player; Installing Remote Control Batteries - Insignia NS-BRDVD User Manual

Insignia NS-BRDVD Blu-ray Disc Player

Display

1 Displays the playback status icon. For
more information, see "Playback
status icons" on page 7.
2 Displays status information, such as
title number, elapsed time, and repeat
mode. For more information, see
"Status information displays" on
page 7 and "Displaying status
information" on page 16.
Playback status icons
Playback status icon
SD Memory
Disc
Card
—
Status information displays
The following are examples of status information
displays.
Mode
Playback in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
Repeat mode
When a title is playing, the display
shows the current title number
and elapsed time.
The current chapter is in chapter
repeat mode.
Your player is loading a disc.
Dolby Digital audio is being
played back.
www.insignia-products.com

Setting up your player

Installing remote control batteries

To install remote control batteries:
1 Open the battery compartment cover.
2 Insert two AA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols inside the battery compartment.
3 Close the battery compartment cover.
Notes
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different
batteries may have different voltages.
• Make sure that the + and – symbols on the
batteries match the + and – symbols in the
battery compartment.
• If you will not use the remote control for a
month or more, remove batteries to avoid
leakage.
• Dispose of batteries according to local
hazardous waste regulations.
• Do not short-circuit, heat, burn, or disassemble
batteries.
• Do not recharge batteries that are not intended
to be recharged.
7