Firmware update: Download/Install instructions for NS‐2BRDVD & NS‐BDLIVE01
System requirements: a computer with an open USB port, USB flash drive (stick), broadband internet
access and operating software of Windows XP and newer or Mac OS 10.3 or newer. This option is not
recommended with dial‐up or DSL service with a bit rate lower than 256kbps. If the instructions
provided below do not help, call Insignia Customer Support at (877) 467‐4289 for assistance.
First: Download the compressed update file
1. Click on the link to the file: if and save the file to your desktop.
Note: File size is approximately 37 MB. Estimated download time is 3‐4 minutes (download time
will vary based on your connection speed).
2. Insert a blank USB flash drive (stick) that is formatted in FAT32 into the open USB port on your
computer (USB flash drive must not contain any other files etc.).
3. Uncompress the file from your desktop, and then save the uncompressed files to your USB flash
drive (stick).
4. After saving the firmware to your USB flash drive; remove the USB flash drive from your
computer.
Second: Upgrading the Player Software with a USB Flash Drive (Stick)
1. Turn on the player and eject any disks that may be in the player, and remove any USB flash drive
already inserted in the player.
2. Insert the USB flash drive containing the firmware that was downloaded into the player's USB
port located on the back of the player.
3. After the player has recognized the USB flash drive (stick), a screen similar to the one below will
appear:
Blu‐ray DVD players.